AMIAD WORLDWIDE

Select your country and language

Based on your current location, we recommend this Amiad website for you

- English arrow
arrow down
CASE STUDY

Cooling Tower Sidestream Filtration, USA

PROJECT
WE ARE COMMITTED - CLEAN WATER IS LIFE
Project ID

icon Country Country

USA

icon Application Application

Cooling Water

icon Water source Water source

Cooling Tower Sump

icon Filtration solution Filtration solution

2 skids of 2 x SAF-6000 (25 micron)

התקנת מסנן רשת
pattern

Background

A large electric utility company installed five new GE LM100 gas turbines for expansion of their existing power station and for their new power station in the El Paso, TX area. The expansion and the new power plant were necessary to meet growing demand from the community and the expanding Fort Bliss U.S. Army Base. The first system was installed at the existing power station and the additional 2 systems were installed at the new one.

Challenge

The existing power station did not have a sidestream filter included in the original system design. As the plant neared completion, the startup team realized that inclusion of a filter system would prevent many of the issues seen with the existing station design. The cooling towers at these stations are subject to frequent dust storms which contaminate the towers with dust, pollen and grass. Filtration of these contaminants prevents fouling of the intercooler, a heat exchanger, which is a component of the GE LM100 turbine systems. This last-minute design left a short timeframe in which to select, design, build and install the filter system.

Solution

A plug and play skid with a feed pump, a single SAF-6000 filter with a 25 micron screen and control system was proposed to the customer for the existing for a total flow rate of 700 GPM (159 m3/h). The filter system is installed as a sidestream to the cooling tower sump. The filter skid was designed, assembled and delivered in eight weeks to allow installation before the startup of the plant. Following this first filter installation, the new power station was designed with two system skids, each including 2 x SAF-6000 filters with 25 micron screens, designed to treat 1,400 GPM (318 m3/h) (the water for two gas turbines).

Results

The 25 micron filters have kept the systems clean; actually keeping the bottom of the cooling towers visible to the naked eye.